A USB device driver for Windows for the IC-705 is available for download from Icom Japan. Icom Japan Download for IC-705 USB Device Driver. Flrig Configuration. Flrig is the easiest way to interface your IC-705 to a computer. No Rigcat XML files are required, and you can easily interface to WSJT-X by selecting Flrig as your radio. Aug 15, 2018 Icom USB 3.0 Supported - Changes in this version Windows 10 version 1803 (April 2018 update) is now supported.USB DRIVER INSTALLATION GUIDE. IC-7300 Hi-Resolution Image.tif 2.4 MB Firmware/Software. IC-7300 Firmware Updates. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues.
Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the This page contains the VCP drivers currently available for FTDI devices. For D2XX Direct drivers, please click here.
-->
For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:
CS-31PLUS
Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.
To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.
For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:
Download Icom Port Devices Driver Windows 10
If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.
- Amateur
- All Mode
- All Mode
| Download Type | USB Driver |
|---|---|
| Model name | IC-7100/IC-7200/IC-7300/IC-7410/IC-7600/IC-7610/IC-7850/IC-7851/IC-9100/IC-9700/IC-R8600 |
| Version | Version 1.30 |
| Update | 2018/06/07 |
| Major changes | Changes in this version
|
| Note | |
| File Size | 7.67MB |
| File Type | zip |
| Manual | manual download page |
Regarding this Download Service.
When using this download service, the implementation, use and/or results of use are the sole responsibility of you using this download service and the equipment. You shall comply with applicable laws and regulatory requirements in the use of this download service and in the operation of the equipment.
AP-95M
Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. and its affiliates expressly denies and is free from any and all responsibility arising from the result of damage from such an event.
You agree not to hold Icom Inc. and its affiliates responsible for any damage to your equipment operation or loss of data, or unauthorized use of the equipment, whether intentional or not, as a result of use this download service.
CS-705